Home » News » education-career » IIT Guwahati Researchers Create Alternatives For AC That Runs Without Electricity
3-MIN READ

IIT Guwahati Researchers Create Alternatives For AC That Runs Without Electricity

By: Education and Careers Desk

News18.com

Last Updated: July 04, 2022, 12:34 IST

New Delhi

IIT Guwahati create alternative for ACs which works without electricity (Image by Shutterstock/ Representational)

IIT Guwahati create alternative for ACs which works without electricity (Image by Shutterstock/ Representational)

IIT Guwahati Researchers set out to resolve these issues and bring out an affordable and more efficient radiative cooling system that can operate round the clock.

The Indian Institute of Technology (IIT) Guwahati Researchers have designed an alternative for AC (air condiction) which the IIT claims are not only affordable and efficient but also operates without electricity.

The innovation called ‘Radiative Cooler’ coating material can be applied on the rooftops and functions both during day and night time to provide an alternative to the conventional air-conditioners.

Passive radiative cooling systems operate by emitting the heat absorbed from the surrounding in the form of infrared radiations that can pass through the atmosphere before getting dumped into the cold outer space, explains the IIT.

Most passive radiative coolers operate only at night. For daytime operation, these coolers need to reflect entire solar radiation as well. Till now, these cooling systems are not able to provide sufficient cooling during the daytime. IIT Guwahati Researchers set out to resolve these issues and bring out an affordable and more efficient radiative cooling system that can operate round the clock.

The theoretical design of the radiative cooling system has been tested and verified against rigorous computer-based simulations. This patterning-free design of radiative cooler is large-area compatible and hence, also less prone to imperfections during the fabrication process, said the IIT. Therefore, it is expected that the cooling power to be obtained after the construction of the cooler is going to closely match the calculations. With this innovation, cooler manufacturers can now explore radiative cooling to make electricity-free cooling systems. “The team hopes this will reach the market once the large-scale prototypes are developed and tested for operational stability and durability under different climatic conditions. They are now working towards this," said the IIT in an official notice.

Ashish Kumar Chowdhary, Research Scholar at IIT Guwahati under the supervision of Prof. Debabrata Sikdar, Assistant Professor, Department of Electronics and Electrical Engineering, IIT Guwahati, along with his research team has designed and modeled such a passive radiative cooler.

Their innovation has been recently covered in the Current Science Report, which was initially published in the Journal of Physics D: Applied Physics by IOP Publishing, United Kingdom.

Highlighting the unique aspects of this innovation, Prof. Debabrata Sikdar, Assistant Professor, Department of Electronics and Electrical Engineering, IIT Guwahati, said, “Designing a passive radiative cooler for daytime operation is more challenging due to the simultaneous requirement of high reflectance in the entire solar spectral regime (0.3–2.5 µm wavelengths) and high emissivity in the atmospheric transmittance window (8–13 µm wavelengths).”

Further, Prof. Debabrata Sikdar said, “These radiative coolers requiring no external energy sources for their operation could be one of the best alternatives to replace the conventional air conditioning systems used to cool buildings and automobiles in countries experiencing hot weather, such as India. Unlike traditional cooling technologies that dump the waste heat into the surroundings, radiative cooling is a unique process that cools an object on the earth by sending excessive heat directly into the extremely cold Universe.”

Explaining the technology to overcome the limitations of conventional radiative coolers, Mr. Ashish Kumar Chowdhary said, “For a radiative cooler to work during the daytime, the material should reflect the solar and atmospheric radiations falling on it. Since the materials used in conventional coolers absorb more solar radiation and emit less during the day, they do not work during the daytime. While daytime cooling can be achieved using polymer-based passive radiative coolers, oxidation degrades the polymers resulting in a limited lifespan.”

To address this, the innovators considered using thin films of silicon dioxide and aluminum nitride. These materials have low optical density corresponding to the wavelength range of solar and atmospheric radiations. But at atmospheric transmittance wavelengths, they have high optical density. When optical density is high, radiations travel slower through a medium and get absorbed more. To remain at thermal equilibrium, the material emits all the absorbed radiations like a black body.

“Instead of a single layer, the team cascaded silicon dioxide and aluminum nitride thin film layers on a silver layer, used as a ground metal, placed over a silicon substrate. The cooler they designed achieved about 97 per cent reflectance for solar and atmospheric radiations and 80 per cent emissivity for radiations in atmospheric transmittance wavelengths. The net cooling power is estimated to be 115 Wm−2 which could reduce ambient temperature up to 15 degrees below the outside temperature," said the IIT in a statement.

Read all the Latest News, Breaking News, watch Top Videos and Live TV here.

first published:July 04, 2022, 12:34 IST
last updated:July 04, 2022, 12:34 IST
Read More