Take the pledge to vote

For a better tommorow#AajSawaroApnaKal
  • I agree to receive emails from News18

  • I promise to vote in this year's elections no matter what the odds are.
  • Please check above checkbox.


Thank you for
taking the pledge

Vote responsibly as each vote counts
and makes a diffrence


Issued in public interest by HDFC Life. HDFC Life Insurance Company Limited (Formerly HDFC Standard Life Insurance Company Limited) (“HDFC Life”). CIN: L65110MH2000PLC128245, IRDAI Reg. No. 101 . The name/letters "HDFC" in the name/logo of the company belongs to Housing Development Finance Corporation Limited ("HDFC Limited") and is used by HDFC Life under an agreement entered into with HDFC Limited. ARN EU/04/19/13618
Associate PartnerAssociate Partner
News18 » Tech
2-min read

Technology Saves Life: 3D Printed Vertebrae Helps 32 Yrs Old Walk Again

The 10-hour-long surgery is the first-of-its-kind for reconstruction with 3D-printed vertebrae in India and third in the world, following similar surgeries that were conducted in China and Australia for different parts of the spine.


Updated:February 16, 2017, 11:00 AM IST
North-East India, Hurdles, Researchers, Science and Technology
Representative Image. (Image: REUTERS/Regis Duvignau)

Offering hope for those suffering from spine-related problems, surgeons at a leading hospital here on Wednesday announced they have successfully implanted for the first time a 3D-printed vertebrae in a 32-year-old woman, helping her walk again after a bout of disabling spinal tuberculosis.

The team of surgeons from Medanta-The Medicity, Gurugram, replaced the damaged vertebrae with a 3D-printed titanium vertebrae to bridge the gap between the first and fourth cervical vertebrae.

"Given the complexity of this case, the use of 3D-printing technology has helped us in bringing a successful outcome. The patient today on 12 post-operative days is now walking with minimal support, all her pain has gone, her voice and dysphasia has recovered completely and, most importantly, her life was saved by this technique," Dr V Anand Naik, Senior Consultant (Spine Surgery), Bone & Joint Institute at Medanta who led the team of surgeons, told IANS.

The 10-hour-long surgery is the first-of-its-kind for reconstruction with 3D-printed vertebrae in India and third in the world, following similar surgeries that were conducted in China and Australia for different parts of the spine.

Also read: Indigenous 'Nirbhay' Missile to be Test-Fired Again in May-June: DRDO

"This is the first such surgery in India and probably third in the world by using 3D-printing technology. These techniques have opened a new avenue wherein any type of complex reconstruction can be done in the spine with less collateral damages," Dr Naik added.

A teacher by profession, the woman was battling infertility and she suffered tuberculosis (TB) due to high intake of steroid which lowered her immunity to a level where the patient developed TB at 10 different vertebrae in the spine.

The first, second and third cervical vertebrae were severely damaged up to an extent that there was no skeletal support available between the skull and the lower cervical spine -- a disconnect between the skull and lower part of the spine.

As a result, the head of the patient was sliding forward and curved in such a way that it was causing obstruction to the spinal cord.

It resulted in progressive weakness in all the limbs and increased the risk of quadriplegia, a condition linked to compression of the respiratory nerves that could lead to death.

The team of surgeons at Medanta used an intricate computer software to plan every detail of the operation.

The titanium cage was customised according to the patient's original spine.

Also read: D-Link Security Solution 'Omna 180 Cam' Now Available on Apple.com

The high-resolution CT and MRI scans of the patient spine were uploaded on the software and a dummy of the patient's spine was 3D printed to measure the gaps and surgical resection between the first and the fourth cervical vertebrae.

Finally, the three-dimensional titanium implant was printed, which was to be placed in the body.

The printed 3D titanium vertebrae were further tested for biomechanics and stress risers after receiving inputs from design teams in India, Sweden and the US, Medanta said.

The patient is now recovering fast with the newly-reconstructed cervical vertebrae, according to the doctors.

"We are extremely happy with the results as the patient is gradually moving back to normalcy," said S.K.S. Marya, Chairman, Institute of Bone & Joint at Medanta.

The patient is expected to lead an independent risk-free life in about two weeks, according to the doctors.

Also read: How ISRO And NASA Achievements Have Shaped 'Space Exploration' Over The Years

Get the best of News18 delivered to your inbox - subscribe to News18 Daybreak. Follow News18.com on Twitter, Instagram, Facebook, Telegram, TikTok and on YouTube, and stay in the know with what's happening in the world around you – in real time.

| Edited by: Sarthak Dogra
Read full article
Next Story
Next Story

Also Watch


Live TV

Countdown To Elections Results
To Assembly Elections 2018 Results